TravcoForum.com

Travco Classic Motorhome Support & Discussion Forum

Skip to content

Change font size

Board index » Maintenance » Engines
Post here for engine related Discussion

change Exhaust Manifold for new exhaust.

Unread postby Fraynez on Tue Aug 29, 2017 9:36 pm

Hello everyone. I would like to know if i can remove the old Exhaust Manifold. The ones that are cast iron and put in Center dump exhaust Manifold that are stainless steal. The passenger side has dampers. Do you need that? The new ones do not?

https://i.ebayimg.com/images/a/(KGrHqIO ... s-l500.jpg

The new ones.

https://i.ebayimg.com/images/g/pHcAAOSw ... s-l500.jpg

Will these work?
thank you for the help
User avatar
Fraynez
New Member
New Member
 
Posts: 17
Joined: Fri Jun 26, 2015 4:46 pm
Travco Model: 220

Re: change Exhaust Manifold for new exhaust.

Unread postby KB2CRK on Wed Aug 30, 2017 6:08 am

Those should work but it may need a little modification to the exhaust pipes to tie in properly. The damper is for heating up the manifold to supply warm air to the engine on cold starts. Just make sure you have the right ones for your engine. The 318, 413 and 440 all use different manifolds.
User avatar
KB2CRK
Moderator
Moderator
 
Posts: 859
Joined: Wed Nov 19, 2014 2:26 pm
Location: Arnoldsville GA
Travco Model: 76 Mahal 2+2

Re: change Exhaust Manifold for new exhaust.

Unread postby Fraynez on Sun Sep 10, 2017 6:10 pm

Thank you for the info. I will let you know how it turns out.
User avatar
Fraynez
New Member
New Member
 
Posts: 17
Joined: Fri Jun 26, 2015 4:46 pm
Travco Model: 220


Return to Engines

Who is online

Users browsing this forum: No registered users and 3 guests