change Exhaust Manifold for new exhaust.
Author
Message
- Offline
- Regular Member
- Posts: 17
- Joined: Fri Jun 26, 2015 4:46 pm
- Travco Model: 220
change Exhaust Manifold for new exhaust.
Hello everyone. I would like to know if i can remove the old Exhaust Manifold. The ones that are cast iron and put in Center dump exhaust Manifold that are stainless steal. The passenger side has dampers. Do you need that? The new ones do not?\n\nhttps://i.ebayimg.com/images/a/(KGrHqIOKkQE1p5zCm(WBNcnyrQK1Q~~/s-l500.jpg \n\nThe new ones.\n\nhttps://i.ebayimg.com/images/g/pHcAAOSw7htZlyEl/s-l500.jpg\n\nWill these work? \nthank you for the help
- Offline
- Site Admin
- Posts: 1233
- Joined: Wed Nov 19, 2014 2:26 pm
- Travco Model: 76 Mahal 2+2
- Location: Arnoldsville GA
- Contact:
Re: change Exhaust Manifold for new exhaust.
Those should work but it may need a little modification to the exhaust pipes to tie in properly. The damper is for heating up the manifold to supply warm air to the engine on cold starts. Just make sure you have the right ones for your engine. The 318, 413 and 440 all use different manifolds.
- Offline
- Regular Member
- Posts: 17
- Joined: Fri Jun 26, 2015 4:46 pm
- Travco Model: 220
Re: change Exhaust Manifold for new exhaust.
Thank you for the info. I will let you know how it turns out.