Wondering...

Post Reply
Author
Message
Offline
New Member
New Member
Posts: 6
Joined: Sat Jun 22, 2019 7:55 pm
Travco Model: 210

Wondering...

Unread post by Aspieguy » Fri Jun 28, 2019 7:51 pm

So I don't have a 210 but I'm making plans to get one. What I'm wondering is the frames, were they actually from 1 ton trucks? If so could I theoretically drop the body on a standard truck frame??

Offline
Moderator
Moderator
Posts: 1099
Joined: Wed Nov 19, 2014 2:26 pm
Travco Model: 76 Mahal 2+2
Location: Arnoldsville GA
Contact:

Re: Wondering...

Unread post by KB2CRK » Sat Jun 29, 2019 7:57 am

From what I understand the Early motorhome chassis was a forward control trcuk chassis P-series maybe? Then is became a specific Motorhome chassis. Chassis swaps have been done but require cutting the body framework off of the old chassis and welding it back to the new. One 210 in Florida was swappwed onto an Oshkosh bus chassis. You can find Information on it by searching Watusi on the facebook Travco lovers page. With enough time, money, and skill just about anything is possible.

Post Reply

Return to “Travco 210”